A bathroom remodel is only as good as what sits under the tile. On this Los Angeles project we took the shower back to the structure and rebuilt it properly — new floor framing, a full Schluter-KERDI waterproofing system, and finishes chosen to last: sage-green glazed tile, large-format stone-look porcelain, solid brass fixtures and a teak vanity.

Rebuilding the floor
The old floor came out completely. We reframed the joists, leveled everything by laser and rebuilt the subfloor structure so the new shower floor would be dead flat and silent underfoot — no flex, no cracks in the grout lines later.

Waterproofing: Schluter-KERDI
Every wall and the bench were wrapped in Schluter-KERDI membrane with sealed seams and corners. A shower built this way is waterproof behind the tile, not just at the surface — the difference between a remodel that lasts five years and one that lasts thirty.


Tile and stone
The side walls wear vertical sage-green glazed tile with a tiled niche; the back wall and floor are large-format stone-look porcelain. The built-in bench is topped with a solid stone slab, and the floor runs in small hex tiles to a linear drain.




The vanity
A floating teak vanity with brass hardware anchors the room. Beside it, a matching teak wall cabinet hides a pull-out organizer on a brass rail — storage you do not see until you need it. Frameless glass with brass hinges keeps the whole room open.




Planning a bathroom remodel in Los Angeles? ProHands Home Improvement — free estimate: 818-401-7766.
