Quality wall painting
To get a quality wall paint, you need to follow a certain sequence of actions
ARTICLES
3/29/20231 min read


To get a quality wall paint, you need to follow a certain sequence of actions:
1. Preparation of the surface. The walls must be cleaned of dust and dirt. If there is old paint on the walls, it must be removed. If there are cracks and chips on the walls, they must be sealed with putty and sanded.
2. Preparation of the paint. The paint needs to be thoroughly mixed to avoid lumps and the primer paint diluted in the right proportion with water.
3. Environmental protection. It is necessary to protect the floor and furniture from the paint. Film or newspapers can be used for this purpose.
4. Applying Primer. Priming the surface before applying the main paint will improve its adhesion to the surface and increase the life of the paint.
5. Paint Application. Paint should be applied evenly with a brush, roller, or sprayer. Paint corners and areas that are hard to reach first, then move on to larger surfaces. Do not apply too thick a coat of paint, as this can cause streaks and irregularities on the surface.
6. Applying additional coats. If necessary, reapply the paint 2-3 hours after the first coat.
7. Finishing Step. After the paint dries, check the surface for irregularities and defects. If there are imperfections, fix them.
By following these recommendations, you will get a quality wall painting.