Construction of a 120-foot Long Redwood Wood Fence with Wicket Gate in Santa Monica

Introduction

In Santa Monica, constructing a durable and aesthetically pleasing fence can greatly enhance the beauty and security of your property. This blog post will guide you through the process of building a 120-foot long redwood wood fence with a wicket gate.

Materials

Before starting the construction, gather all the necessary materials. For this project, you will need:

• Redwood wood posts

• Redwood wood boards

• Galvanized nails and self-tapping screws

• Concrete mix

• Hinges and latch for the wicket gate

Step-by-Step Guide

1. Planning and Marking

Start by planning the layout of your fence. Measure the area where the fence will be installed and mark the locations for the posts. Ensure the distance between each post is consistent.

2. Digging the Post Holes

Using a post hole digger, dig holes for the posts. The depth of the holes should be approximately one-third the height of the posts. Place the posts in the holes, ensuring they are level and plumb. Fill the holes with concrete mix and allow it to set.

3. Installing the Rails and Boards

Attach the horizontal rails to the posts using galvanized nails. Make sure they are level and evenly spaced. Then, attach the vertical boards to the rails, leaving a small gap between each board for ventilation.

4. Building the Wicket Gate

Construct the wicket gate separately using redwood wood boards. Attach hinges to one side of the gate and the corresponding post. Install a latch on the opposite side for secure closure.

5. Finishing Touches

Once the fence and wicket gate are complete, inspect for any loose nails or boards. Sand any rough edges and apply a protective sealant or stain to enhance the longevity of the wood.

Maintenance Tips

To ensure your redwood wood fence remains in excellent condition, follow these maintenance tips:

• Regularly inspect for any signs of damage or decay.

• Apply a fresh coat of sealant or stain every few years.

• Trim any vegetation that may come in contact with the fence.

• Keep the area around the fence clean and free from debris.